Logo SC&T


IP/PoE Transmission


IP03P

POE Extender over Two Wire

  • Extend Ethernet or any TCP/IP devices up to 1Km.
  • Ethernet and POE data over any two wire cable: UTP, Coax, telephone, bell, alarm, power cables.
  • Data transfer distance up to 500M, data rate is up to 30Mbps based on distance.
  • Support10/100Mbpstransmissionrate.
  • Flexible power source either POE Switch or external DC power adapter option. (order separately)
  • Provides pass-through POE up to IEEE802.3at30W.
  • Support high power POE to PTZ cameras at long distances.
  • Connected devices are supplied with up to 7W via POE.
  • IP03P Power Source Option Model: DC48V 40W power adapter: SWP480830R, DC56V 70W power adapter: SWP551260 POE Injector/POE Switch: IP05I, IP05H, High Power POE Injector/ POE Switch: IP06I, IP06H
IP03P

IP01P

Economic POE Extender over Coax

  • To extend IP/POE camera over coax cable.
  • Connects IP/POE camera to 10/100 BaseT POE Injector/Switch over one coax cable.
  • Support POE: 10Mbps at 7W 500M, 10Mbps at 14W 300M, 100Mbps 15W 100M
  • Support 10/100 Mbps transmission rate.
  • Power source from POE Injector/POE Switch (order separately)
  • IP01P Power Source Option Model: POE Injector/Swith: IP05I, IP05H
IP01P

IP07M

Chainable IP Extender with Power over Coax/Two Wire

  • Extend IP camera signal with Power over existing coaxial cable or any two wire cable.
  • Provide IP camera power up to DC12V 1Amp.
  • Support chainable/ series/star connection up to 4 units of IP07M.
  • Long range transmission up to 500 meters (Max.)
  • Support 10/100BASE-T transmission rate.
  • Perfect to upgrade the analog camera system into IP CCTV application.
  • IP07M Power Source Option Model: DC48V 40W power adapter: SWP480830R, DC56V 70W power adapter: SWP551260
IP07M

3G/HD-SDI Transmission


SDI05A

HD-SDI over CAT5 Extender – Active Type

  • To send HD SDI signal over CAT5e UTP cable.
  • Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M)
  • Up to 100M meters via CAT5e cable at HD-SDI resolution.
  • Optional model: SR01 signal repeater for longer distance application.
SDI05A

SR02E

HD-SDI Repeater

  • Extend HD SDI signal over 75Ω coax cable up to 200M.
  • Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M), 3G-SDI (SMPTE 424M).
  • Built in 2 output HD-SDI distribution function.
  • Support video signal NTSC, PAL, 720p, 1080i, 1080p.
  • Reclocker to resynchronize the signal—bringing it back to its original condition.
  • Compact size for easy installation.
SR02E

SDI04D

1 Input 4 Output HD-SDI Distribution Amplifier

  • HD-SDI re-clocking 1 in 4 out distribution amplifier
  • Provides automatic input cable re-clocking and equalization to 400 meters.
  • Support SDI (SMPTE 259M), HD-SDI (SMPTE 292M), 3G-SDI (SMPTE 424M).
  • HD signal distance total up to 400 meters.
  • Perfect for long range HD-SDI distribution application.
SDI04D

Video & Power over Coax


CA101VP

Video & Power over One Coax Cable

  • To send video and camera power over one coaxial cable.
  • Transmission distance up to 800M (Max.)
  • Support camera power up to DC12V 1Amp.
  • Power adapter Optional model: DC24V, DC48V, DC56V
CA101VP

960H Camera UTP Transmission


TTA111VEA-960H

960H Long Range Transmission over UTP Cable 1.2KM

  • To send 960H camera video signal over twisted pair cable.
  • Eliminate the coaxial coax.
  • Package include: TTP111VE Passive Video Transmitter + TTA111VHA Digital Auto Gain Active Receiver with power adapter.
  • TTP111VE is passive type, no power required.
  • TTP111VE compact size for easy installation at camera side.
  • TTA111VHA-960H design for 960H video auto gain receiver built in two mode auto gain control.
  • TTA111VHA-960H auto gain receiver built in transient protection and grounding lifting.
TTA111VEA-960H

HDBaseT Transmission


HE02N

HDMI (HDBaseT) CAT5 Extender with Ethernet/ARC/RS232/IR

  • Extends HDMI, Ethernet, ARC, RS232 and IR signal over one CAT5e/6 cable.
  • Uncompressed high definition video up to 1080p@60Hz@48bits.
  • HDMI 1.4 with 3D, 4k x 2k support, HDCP & DVI Compliant.
  • Max. Data Rate- 10.2Gbps.
  • Audio supports up to LPCM 7.1 @ 192KHz, Dolby TrueHD, DTS-HD MA
  • Transmission range up to 100 meters at 1080p resolution.
  • Support one port 10/100Mbps network, allow to connect the network TV or Ethernet devices.
  • ARC or optical digital audio mode auto selection, send TV digital audio back to the amplifier.
  • Bi-directional IR, support 30-60khz.
  • Bi-Directional RS232 interface – commands and data can flow in both directions via RS232, allowing status requests and control of the destination unit.
HE02N

HE02P

HDMI (HDBaseT) CAT5 Extender with Ethernet/RS232/IR/PoH

  • Extends HDMI, RS232 and IR signal with Ethernet over one CAT5e/6 cable.
  • Uncompressed high definition video up to 1080p@60Hz@48bits.
  • HDMI 1.4 with 3D, 4k x 2k support, HDCP & DVI Compliant.
  • Max. Data Rate- 10.2Gbps.
  • Audio supports up to LPCM 7.1 @ 192KHz, Dolby TrueHD, DTS-HD MA
  • Transmission range up to 100 meters at 1080p resolution.
  • Bi-directional IR, support 30-60khz.
  • Bi-Directional RS232 interface – commands and data can flow in both directions via RS232, allowing status requests and control of the destination unit.
  • Support two port 10/100Mbps network, allow to connect the network TV or Ethernet devices.
  • Support PoH (Power over HDBaseT), no external power required at receiver.
  • External power supply included for the Transmitter.
HE02P

CATV Transmission


CE01TV

CATV CAT5 Extender

  • To send broadband CATV, VHF, VHF and FM signal over CAT5e cable.
  • Shielded RJ45 male with 2M RG6 coax cable.
  • Passive type, no external power required.
  • Support bandwidth 40Mhz to 2.4Ghz.
  • Distance up to 30M at 2.4Ghz frequency, up to 100M based on low frequency.
  • Work with CATV, satellite receivers, RF splitter and amplifier.
  • Package include 2 units/a pair.
CE01TV

HDMI Transmission


HKM01

HDMI KVM & USB, Audio, RS232, IR CAT5 Extender 180M over IP

  • Extend HDMI, RS232, IR and USB signals over one CAT5E/CAT6 cable.
  • Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA) 32bpp@ 60 Hz
  • Transmission range up to 150M over CAT5e, 180M over CAT6.
  • Supports 2-way RS232 commands at baud rate 115200 (control software on a PC, or other automated control system hardware) to control devices attached to the matrix using RS232. Full Duplex data communication.
  • Built in Bi-Directional analog audio.
  • Built in Bi-Directional IR.
  • HKM01T transmitter unit built in HDMI loop output.
  • Receiver unit with 4 ports USB devices (1 port USB 1.1 & 3 Port USB 2.0), to extend USB peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
  • Support point to point and multiple source devices to multi-display connections via Gigabit network switch.
  • Perfect for control remote machines and security monitoring systems, digital signage application.
  • Optional model: SR01 signal repeater for longer distance application.

Over Gigabit Ethernet switches: One to Multiple or Multiple to Multiple Connection:

HKM01

1 Input to Multiple outputs connections via a Gigabit network switch / Multiple Inputs to Multiple outputs connections via a Gigabit network switch

HKM01

HE03L

HDMI CAT5 Extender 180M with Chainable Receiver

  • Extends HDMI signal over one CAT5/5e/6 cable.
  • Including HE03LT transmitter and HE03LR receiver unit.
  • Receiver built in 1 x HDMI output and 2 x CAT5 output for chainable to another receiver for longer distance and multiple displays.
  • HE03LR receiver could be chainable up to 31 layers with distance 3.1KM. It also could be cascade, up to 100 displays.
  • HDMI 1.3 compliant.
  • HDCP compatible.
  • Transmission range up to 150M over CAT5e, 180M over CAT6.
  • Plug and play for easy operation.
HE03L

HE01SI

3D HDMI & IR CAT5E Extender over Single CAT5E cable

  • Extends HDMI and IR signal over one CAT5/5e/6 cable.
  • HDMI 1.3 compliant, 3D capable
  • Built in IR control, IR signal could be selectable at either TX/RX side.
  • Transmission range up to 70 meters by 1080i/720p.
  • Transmission range up to 40 meters by 1080p@60Hz@24bit.
  • Built in auto equalization for easy plug and play.
  • Transmitter unit built in EDID auto backup function.
  • HDCP compatible.
HE01SI

HE02EI

3D 4Kx2K HDMI (HDBaseT) & IR CAT5 Extender Over Single CAT5 Cable

  • Extends HDMI and IR signal over one CAT5/5e/6 cable.
  • Uncompressed high definition video up to 1080p@60Hz@48bits and 3D and 4K*2K capable.
  • Built in IR control, IR signal could be selectable at either TX/RX side.
  • Max. Data Rate- 10.2Gbps.
  • HDMI 1.4 and HDCP compliance.
  • Transmission range up to 60M by CAT5e/6, 70M by CAT6a cable at 1080p@60Hz@24bit.
  • Audio support up to LPCM7.1 , Dolby TrueHD , DTS-HD MA.
HE02EI

HE01EI

3D HDMI & IR CAT5 Extender over Two CAT5e cable

  • Extends HDMI & IR signal over two CAT5/5e/6 cables.
  • External power supply requested with transmitter unit only, no power required at receiver (monitor) side.
  • Support 3D at 1080p/24fps.
  • Built in IR signal, IR control could be selectable at either TX/RX side.
  • Transmission range up to 60M at 1080i, 40M at 1080p resolution.
  • HDMI 1.3 compliant, DDC, DTS-HD,Dolby.
  • HDCP compliant.
HE01EI

VGA Transmission


VKM03

VGA & USB with Stereo Audio, RS232, and IR CAT5 Extender

  • Extend VGA, stereo audio, RS232, IR and USB signals over one CAT5E/CAT6 cable.
  • USB port support USB 2.0, USB 1.0 & USB 1.1
  • Full Duplex data communication.
  • Transmitter unit built in VGA loop output.
  • Receiver unit with 4 ports USB devices, to extend USB 2.0 peripheral devices, such as flash disk, hard disk, keyboard, mouse, etc.
  • Supports up to 1920x1080.
  • Transmission range up to 140 meters over CAT5e, 180M over CAT6.
  • Support point to point and point to multi-display connections via Gigabit network switch.
  • Plug and play for easy operation.
  • Perfect for control remote machines and security monitoring systems, digital signage application.
  • Optional model: SR01 signal repeater for longer distance application.
VKM03 VKM03



View our Catalog Online / SC&T full product range:




TOP